Premium 20 Micron Sediment Water Filter Replacement Cartridge for Whole House RO Systems

The Membrane Solutions 20 micron polypropylene melt-blown water filter, model MPP-F10-20, is a high-quality filtration solution designed to provide your family with safer, healthier water. This filter meets the NSF certification, ISO9001 standards, and is BPA-free, ensuring no fiber shedding due to the unique melt-blown technology, which prevents re-contamination of the drinking water.

As the first-stage filter in a water filtration system, this sediment water filter effectively removes up to 99% of rust, silt, sand, and other undissolved particles from dirty water. By protecting your post-filters, water appliances, and pipes with purer, higher-quality water, it helps to promote a healthier lifestyle.

The 10-inch water filter cartridge typically filters up to 10,000-15,000 gallons of water, with the exact filtration capacity and change-out cycle dependent on the inlet water quality and daily usage. For optimal water quality, it is recommended to replace the filters regularly.

The multi-layer structure of this micron filter features three separated gradient density layers, which allow for deep sediment filtration and enhanced performance, resulting in a longer service lifetime compared to similar-sized sediment water filters.

This standard universal filter is compatible with a wide range of water filtration systems, including Reverse Osmosis Systems, Under Sink Filtration Systems, and Whole House Water Filtration Units with 10-inch filter housings. It is compatible with a variety of common filter models, such as Culligan P5, Aqua-Pure AP110, AP110-NP, DuPont WFPFC5002, CFS110, OMNIFilter RS14, Whirlpool WHKF-GD05, American Plumber WC34-PR, and GE FXUSC.

For your convenience, the product specifications are as follows: - Part Number: MPP-F10-20 - Product Height: 10 inches - Product Width: 2.5 inches - Product Inner Diameter: 1.1 inches - Micron Rating: 20 Micron - Initial Pressure Drop: <0.2 psi @ 5 gpm - Recommended Service Temperature: 40-113°F / 5-45°C - Maximum Operating Temperature: 180°F / 82°C - Maximum Operating Pressure: 75 PSI @ 68°F (Depending on operating parameters)

The Membrane Solutions 20 micron polypropylene melt-blown water filter is tested and certified by NSF International against NSF/ANSI Standard 42 for material requirements.

product information: